Advanced Support
- Total activity 312
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 19
Articles
Recent activity by Advanced Support-
[Pool Cleaner M1-AI] Do I need to power off the Pool Cleaner after every use?
No, you don’t need to turn off the power switch after daily use—the robot can remain powered on.If you won’t be using the robot for an extended period, turn off the power switch in front of the han...
-
[Pool Cleaner K] How to install and separate the dual filter?
1. Remove the filter basket from the robot.2. To separate the dual-layer fine filter, gently release it from the snap buckles located on the bottom of the filter basket.3. To install the fine filte...
-
[Pool Cleaner KN] Do I need to power off the Pool Cleaner KN after every use?
No, you don't need to turn off the power switch (located behind the filter) after daily use — the robot can remain powered on. If you won’t be using the robot for an extended period, turn off the p...
-
[Pool Cleaner KN] Does the Pool Cleaner KN clean stairs or edges?
The Pool Cleaner KN is great at cleaning your main pool floor and walls, ensuring a clear pool with minimal effort. However, because of its size and design, it may not reach narrow areas like stair...
-
[Pool Cleaner KN] What should I do if my pool cleaner gets stuck on the drain?
Due to its low chassis design, the robot may occasionally get caught on a pool drain cover and may not be able to free itself automatically.You can check for OTA updates in the app to ensure you ar...
-
[Pool Cleaner K] Why does my Pool Cleaner flip over?
Troubleshooting tips:1. Overloaded Filter: A full or clogged filter can affect the robot’s balance and movement, so please clean it.2. Insufficient Water Level: In shallow areas, the self-righting ...
-
[Pool Cleaner KN] What should I do if my Pool Cleaner gets stuck on the stairs?
This is more likely to happen in pools with narrow stairs, curved steps, bench or ledge designs. Pool stairs and irregular transitions may sometimes interfere with the robot’s navigation and cause ...
-
[Swim Jet X] Why is the Swim Jet X Series not fully charged or low on battery when delivered?
For transportation safety reasons, the battery is partially discharged to below approximately 30% before shipment. This follows international battery transportation safety regulations and helps ens...
-
[Pool Cleaner KN] Does the Pool Cleaner clean a tanning ledge?
Yes, the Pool Cleaner can climb onto and clean a tanning ledge as long as the water depth is greater than 40 cm (1.3 ft), which allows the robot to maintain proper operation and suction performance.
-
[Pool Cleaner K] Does the pool cleaner clean stairs or edges?
The Pool Cleaner K is great at cleaning your main pool floor and walls, ensuring a clear pool with minimal effort.However, because of its size and design, it may not reach narrow areas like stairs ...