Once the Pool Cleaner finishes its cleaning cycle, it will automatically park near the pool edge for easier retrieval.
Retrieval Steps
1. Attach the retrieval hook to a suitable telescopic pole.
2. Locate the handle: Due to water refraction and reflections, the handle may be difficult to see. Use the roller brush as a reference point—the handle is located directly above the roller brush.
3. Align the hook with the handle: Position the hook directly over the center of the handle before pulling upward. Avoid hooking from the side or at an angle, as the hook may slide off.
4. Lift the Pool Cleaner slowly and carefully out of the water.
5. Allow excess water to drain before carrying or storing the Pool Cleaner.